|
28-02-2024, 05:46 PM | #1 | ||
Starter Motor
Join Date: Feb 2024
Posts: 4
|
Hi.*
2014 Ford Focus TDCi 2.0l Hatchback. I live in Australia. I recently did a Sync 1 to 3 conversion. Everything is working perfectly except my reverse camera which intermittently works and when it does the image is grainy. It worked perfectly on the original *4” screen.* I ordered a 2016 camera to test as the APIM/ACM was pulled from a 2016 wreck and it loads ok but it is black and white. I’ve reinstalled the original camera again until I can work it out.* If someone can tell me how to get the Mk3.5 to show in colour I’ll reinstall it and make mounting adjustments to the MK3 bracket. I’ve heard about running a LIN calibration or a reverse camera calibration but I can’t find where in ForScan to do either of these. They aren’t in my BCMii module.* I do have firmware updates available but want to do that as a last resort.*I don’t have the paid version of ForScan only the 2 month trial so I need to upgrade to do the firmware updates. |
||
06-03-2024, 05:27 PM | #2 | ||
Starter Motor
Join Date: Feb 2024
Posts: 4
|
Not a single suggestion across 2 posts. Hardly worth being in this group. Goodbye.
|
||
06-03-2024, 05:45 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
so few focus sold these days
|
||